Spinning
Sloping Spinning Wheel Plan DB1112
This is a good working wheel with some similarities to the large Norwegian wheel. Here however there is a sloping bed and a steam bent hooped rim. Nice ornamented turnings. Diam...
Upright Spinning Wheel DB1113
A David Bryant original involving a mother-of-all situated above the main wheel. Simple lines but graceful in appearance - and very practical. 480mm diameter segmented rim...
Spinning Stool DB1120
If you are going to spin on any one of the beautiful wheels in this collection, you should be sitting on a beautiful stool. They are usually simple in construction with four leg...
Great Spinning Wheel DB1147
This design goes way back - it is for those who really want to get back to basics. The huge hoop rim is swung by hand. Yarn is spun off the tip of the spindle. The wheel rim req...
Shetland Spinning Wheel DB1150
This is most peoples favourite piece to make. It is a neat little wheel occupying minimum floor space, and the turning is simple and un-ornamented - but you still have to be acc...
Charka Spinning Wheel DB1151
An Indian design based on an example in Delhi museum Author: David Bryant Plan type: Skill level: A Product Code: DB1151
Connecticut Chair Spinning Wheel DB1152
486mm diameter segmented wheel. Fitted with distaff. Author: David Bryant Plan type: Skill level: 4 Product Code: DB1152
Arkwright Spinning Wheel DB1155
Based on an original in the Science Museum this piece has a heavy segmented wheel and a higher than normal flyer. Originally a flax wheel there is therefore a lantern distaff. T...
Norwegian Spinning Wheel DB1156
See one of these flyer type wheels and drool! A large segmented, 12 spoke wheel. There is a "Lazy Kate" for two bobbins and a flax spinning long distaff. 3 sheet plans...
English Traditional Spinning Wheel DB1158
A sloping bed wheel with a long distaff for flax spinning. The wheel is of a heavy, segmented pattern, 486mm diameter. Author: David Bryant Plan type: A...
Spindle Spinning Wheel DB1159
A smaller version of the Great Wheel. Of more interest to the historian and collector than to a spinner. Hoop rim wheel, 660mm diameter. Author: David Bryant Plan type...
French Spinning Wheel DB1160
As a compliment to the upright Dordogne Wheel this a horizontal wheel with a frame on a triangular base that makes it look “upright”. It is an unusual design coming ...
Crompton Spinning Wheel DB1161
An original Saxony type loom with a steam bent wheel rim. The wheel therefore does not involve a large turning - just 12 perfect copy spindles! The whole wheel can be made on qu...
Dordogne Spinning Wheel DB1162
An upright wheel, 440mm diameter on a triangular base Author: David Bryant Plan type: Skill level: A Product Code: DB1162
Scotsman Spinning Wheel DB1168
A sloping bed wheel of the St. Kilda pattern with a 444mm diameter wheel. Author: David Bryant Plan type: Skill level: A Product Cod...
Hanover Spinning Wheel DB1169
A German sloping bed wheel with a 390mm diameter wheel. Author: David Bryant Plan type: Skill level: A Product Code: DB1169
Spinning Wheel Component Pack DB-S
Wheel axle/crank & pin * Flyer orifice, axle and nut * Treadle stretcher axle bar * Leather for flyer bearings * Author: David Bryant Plan ty...
Spinning Wheel Component Pack DB-U
Wheel axle/crank & pin * Flyer orifice, axle and nut * Treadle stretcher axle bar * Leather for flyer bearings * Fitting instructions for Plan Nos. DB1112, DB1155, DB1156...
Upright Spinning Wheel MM1109
Vic Taylor designed this wheel based on an 18th century original. Again an attractive but definitely “working” pieceAuthor: Vic TaylorPlan type: BSkill level: VProduct Code: MM1109
Distaff Spinning Wheel WW304A
A very basic small wheel well within the capabilities of an average turner. From a Practical Woodworking magazine all dimensions are given , but profiles need scaling up. Even the...
Spinning Wheel WW308
A nice little wheel with sloping bed, heavy segmented wheel, and flax distaffAuthor: Peter BurnardPlan type: ESkill level: AProduct Code: WW308
Upright Spinning Wheel WW309
A simple wheel with little ornamentation, but a good practical worker. There is some metalwork involved. The wheel, of medium weight, is segmentedAuthor: H.A.BabbPlan type: DSkill ...
- Books
- DVDs
- Plans
- Woodworking Tools
